Tigard Roof Pros provides professional fascia & soffit in Tigard, OR for residential and commercial properties across Washington County. Fascia and soffit are the place a roof problem quietly turns into a carpentry problem, and here it turns fast. Wet fir and hem-fir trim held against a saturated gutter through a winter does not last, and by the time you notice, the damage is older than you think.
Almost every rotted fascia we replace was caused by something upstream. An overflowing gutter. A missing drip edge that let water track back onto the trim. A shingle course that stops short of the eave. A downspout outlet that has been dumping onto the board below it for three years. Replacing the wood without fixing the cause simply buys you a repeat performance.
We cut back to sound material, verify the rafter tails behind the fascia are dry and solid, and replace with primed stock that gets back-primed on all six faces before it goes up. That last step is the one crews leave out, and it matters far more here than it would in a dry climate, because the back of a fascia board never gets a chance to dry once the gutter is rehung on it.
Soffit is a ventilation component as much as a trim component, and that is the part that well-meaning repairs destroy. Vented vinyl or perforated aluminum panels installed over an existing solid soffit ventilate nothing at all, because the blocking behind them was never cut open. We open it, verify air actually moves, and install baffles above so the intake genuinely reaches the ridge.
On the older houses out here the soffit is often tongue-and-groove or plywood with round screened vents, and it is worth keeping. Matching new material to it costs less than wrapping the whole eave in aluminum, and it keeps the house looking like itself. We will quote both and tell you plainly what the aluminum actually saves you over the years you plan to stay, which is painting.
There is one situation where we tell people to leave it alone entirely. Discoloration on a soffit is frequently dirt and shade rather than rot, and a soffit that sounds solid to a probe does not need replacing merely because it looks tired. Wash it and paint it. That is a two hundred dollar job we are talking you into instead of a two thousand dollar one, and we do it most weeks.
Our licensed and insured team brings the right materials and equipment to every job — mechanically seamed 24-gauge steel roof panels, self-adhered bituminous membrane at valleys and penetrations, 1x skip sheathing and half-inch plywood decks, continuous ridge venting paired with clear soffit intake, baffles that keep blown-in insulation off the eave vents, step flashing and counterflashing at sidewall terminations — and backs the work with a written workmanship warranty. We serve Tigard and nearby communities including Beaverton, Tualatin, Sherwood, King City.
What We Handle
Everything our fascia & soffit in Tigard covers
One crew, one point of contact, and the full range of fascia & soffit work in Tigard, OR. If it is on this list we do it in house rather than handing it to a subcontractor:
- fascia repair tigard
- soffit repair oregon
- rotted fascia board replacement tigard or
- soffit vent installation washington county
- eave repair oregon
- aluminum fascia wrap tigard
- rafter tail repair oregon
- back primed fascia board
- vented soffit panels tigard
- fascia rot from gutter overflow
- eave and trim carpentry tigard or
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Tigard services.
Materials, equipment and how we do fascia & soffit
The difference between fascia & soffit that lasts and fascia & soffit that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with mechanically seamed 24-gauge steel roof panels, self-adhered bituminous membrane at valleys and penetrations, 1x skip sheathing and half-inch plywood decks, continuous ridge venting paired with clear soffit intake, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Tigard job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in Washington County means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do fascia & soffit outside Tigard
Tigard Roof Pros covers Tigard and the surrounding communities of Washington County. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Fascia & Soffit in Beaverton, OR — Washington County, population 97,494
- Fascia & Soffit in Tualatin, OR — Washington County, population 27,942
- Fascia & Soffit in Sherwood, OR — Washington County, population 20,450
- Fascia & Soffit in King City, OR — Washington County, population 5,184
- Fascia & Soffit in Durham, OR — Washington County, population 1,944
- Fascia & Soffit in Metzger, OR — Washington County, population 4,272
Start on the Tigard Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Tigard Chooses Tigard Roof Pros
- ✓We tell you which side of Oregon's permit-exemption line your roof sits on, in writing, before we price it. That single distinction is where most of the spread between competing bids actually comes from.
- ✓A permit-exempt re-roof is never seen by a building inspector, so we photograph the bare deck the moment the tear-off is done and send it to you before any underlayment covers it up.
- ✓We quote access as its own line. Skinny-lot infill, shared flag drives and second dwellings have taken the boom-truck approach away from a lot of older lots here, and hand-carrying material is real labor that belongs on paper.
- ✓We do not chase weather events, and nobody from this company is going to knock on your door. Damaging hail is close to absent west of the Cascades, and any roofer who tells you otherwise after a thunderstorm is selling something.
The standards behind fascia & soffit
Quality here is not a matter of opinion — it is written down. The fascia & soffit work we do in Tigard follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every fascia & soffit project in Tigard gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free fascia & soffit free estimate in Tigard, or request a quote and we'll get right back to you.