Tigard Roof Pros provides professional metal roofing in Tigard, OR for residential and commercial properties across Washington County. Metal is a better fit in Tigard than on the kind of sprawling suburban roof it usually gets quoted for, and the reason is geometry rather than weather. Infill housing here produces small, simple, steeply pitched roof planes, and simple planes are precisely where standing seam earns its price.
The cost of a standing seam roof scales with complexity, not merely with area. Every hip, valley, dormer and cricket is a hand-formed transition, so a cut-up nineties roof with six dormers gets expensive quickly. A cottage-cluster unit, a townhouse row, a rear-lot dwelling or a garage conversion is often two or four clean planes, and there the metal number lands nearer a premium shingle than most people expect it to.
We install 24-gauge steel with a fluoropolymer finish, mechanically seamed or snap-locked depending on pitch, on concealed clips, which let every panel expand and contract with temperature instead of tearing at its own fasteners. Exposed-fastener corrugated has a place on a shop, a barn or an outbuilding, and we will quote it there, but we do not put it on a house and call it a standing seam roof.
There is a code angle worth knowing about. Oregon's reroofing rules permit a new covering over an existing one in defined cases, and specifically contemplate metal systems designed to transmit loads independently of what is beneath them. On the right structure that can keep a metal re-roof on the permit-exempt side and avoid a tear-off entirely. It is not always available and we will say when it is not.
The genuine advantages here are unglamorous. Metal sheds a wet winter fast, it gives organic growth almost nothing to hold onto, and its service life is long enough that most owners buy it once. The drawbacks are equally real. It is loud in heavy rain unless the deck is solid and properly underlayed, it dents, and a bad flashing detail in metal is far harder to correct than a bad one in shingle.
We will argue against metal in two situations. If your roof is a complex two-story with many intersecting planes, the premium over a good architectural shingle is usually not worth paying. And if you intend to sell within five years, you will not get the money back. Buy metal because you would like to stop thinking about your roof, and not because you expect a return on it.
Our licensed and insured team brings the right materials and equipment to every job — mechanically seamed 24-gauge steel roof panels, self-adhered bituminous membrane at valleys and penetrations, 1x skip sheathing and half-inch plywood decks, continuous ridge venting paired with clear soffit intake, baffles that keep blown-in insulation off the eave vents, step flashing and counterflashing at sidewall terminations — and backs the work with a written workmanship warranty. We serve Tigard and nearby communities including Beaverton, Tualatin, Sherwood, King City.
What We Handle
Everything our metal roofing in Tigard covers
One crew, one point of contact, and the full range of metal roofing work in Tigard, OR. If it is on this list we do it in house rather than handing it to a subcontractor:
- metal roofing tigard
- standing seam roof oregon
- 24 gauge steel roof tigard or
- metal roof cost washington county
- snap lock standing seam
- metal roof over shingles oregon
- kynar finish metal roofing
- exposed fastener metal roof
- metal roof for townhouse tigard
- concealed clip metal roofing
- metal roofing contractor tigard or
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Tigard services.
Materials, equipment and how we do metal roofing
The difference between metal roofing that lasts and metal roofing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with mechanically seamed 24-gauge steel roof panels, self-adhered bituminous membrane at valleys and penetrations, 1x skip sheathing and half-inch plywood decks, continuous ridge venting paired with clear soffit intake, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Tigard job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in Washington County means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do metal roofing outside Tigard
Tigard Roof Pros covers Tigard and the surrounding communities of Washington County. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Metal Roofing in Beaverton, OR — Washington County, population 97,494
- Metal Roofing in Tualatin, OR — Washington County, population 27,942
- Metal Roofing in Sherwood, OR — Washington County, population 20,450
- Metal Roofing in King City, OR — Washington County, population 5,184
- Metal Roofing in Durham, OR — Washington County, population 1,944
- Metal Roofing in Metzger, OR — Washington County, population 4,272
Start on the Tigard Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Tigard Chooses Tigard Roof Pros
- ✓We tell you which side of Oregon's permit-exemption line your roof sits on, in writing, before we price it. That single distinction is where most of the spread between competing bids actually comes from.
- ✓A permit-exempt re-roof is never seen by a building inspector, so we photograph the bare deck the moment the tear-off is done and send it to you before any underlayment covers it up.
- ✓We quote access as its own line. Skinny-lot infill, shared flag drives and second dwellings have taken the boom-truck approach away from a lot of older lots here, and hand-carrying material is real labor that belongs on paper.
- ✓We do not chase weather events, and nobody from this company is going to knock on your door. Damaging hail is close to absent west of the Cascades, and any roofer who tells you otherwise after a thunderstorm is selling something.
The standards behind metal roofing
Quality here is not a matter of opinion — it is written down. The metal roofing work we do in Tigard follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every metal roofing project in Tigard gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free metal roofing free estimate in Tigard, or request a quote and we'll get right back to you.